background image

 

Manual #100-7100 

 

16 

Use with adequate ventilation.  Avoid breathing vapors. 

Improper use of service fluid can cause injury. 
Over exposure can have harmful effect on eyes, skin, respiratory system and possible 
unconsciousness and asphyxiation. 

Improperly blocked vehicles can move. 

Set the parking brake and chock the wheels. 

Moving vehicles can cause injury. 

Moving engine parts. 
The engine cooling fan will cycle on and off depending on the coolant temperature and could 
operate without the engine running. 

Wear safety goggles. 
Always keep objects, clothing, and hands away from the cooling fans and engine parts. 

Moving engine parts can cause injury. 

Hot surfaces are present during and after running the engine. 

Do not contact hot surfaces such as, manifolds, pipes, mufflers, catalytic converters, or 
radiators and hoses. 

Hot surfaces can cause injury. 

Catalytic converters become extremely hot. 

Do not park a converter-equipped vehicle over dry grass, leaves, paper, or any other 
flammable material. 
Do not touch a catalytic converter until the engine has been off for at least 45 minutes. 

Catalytic converters can cause burns. 
 

Cracked fan blade can become airborne. 

Examine fan blades for cracks.  If found, do not service the vehicle. 

Flying objects can cause injury. 

 
Batteries produce explosive gases and can explode, resulting in injury. 

Wear safety goggles when working on or near batteries. 
Use in a well-ventilated area. 
Keep sparks and flames away from the battery and never lay tools, equipment, or other 
conductive objects on the battery. 
When is connecting to the battery, make sure the unit’s power switch is off.  Connect the 
positive lead of the unit to the positive lead battery first; connect the negative lead of the 
unit to a solid ground point as far from the battery as possible. 
Keep battery acid away from skin or eyes.  In case of eye contact, flush with clean water 
for 15 minutes and get medical attention. 
 

Always use a fender cover when working under the hood, to protect vehicles finish. 

Rinse any spills with water immediately. 

Содержание SteerClean-II 500-7100






































Отзывы: