[email protected] www.motorvac.com
13
Diesel Service
Filling and Mixture Setup
The desired ratio of MV3D cleaning detergent to diesel fuel is 1:1. This can be done either in a suitable
external container that is sealed between uses or in the Carbon Clean Dual’s on board diesel tank.
To fill the on board tank with diesel fuel from a vehicle follow the procedure below.
1. Connect appropriate adapters to the fuel rail.
2. Connect TEE adapter 060-4501 to adapters and to outlet hose (red) (see figure below).
3. Turn Gas Diesel regulator on control panel fully counter clockwise (open)
4. Open Valve 1 (valve inline with fuel rail)
5. Close the Valve 2 (on TEE where the outlet hose is connected).
6. Turn vehicle on.
7. Partially open Valve 2 to allow Diesel to enter the Carbon Clean Dual diesel tank. If the valve is opened
too much vehicle fuel line pressure will drop and the engine will stall.
8. When desired amount of gas has entered the tank, close Valve 2.
9. Turn off vehicle.
