Motorola WE800G - Wireless EN Bridge Скачать руководство пользователя | Manualshive

Страница: 64 / 78

background image

Troubleshooting

Section 4

WE800G 4-3

Software Solutions

I cannot access the Configuration Manager for the WE800G.

!

Verify your Ethernet connection to the WE800G.

!

Verify that you are using the correct version of Internet Explorer
or Netscape (Internet Explorer must be above version 5.2).

!

Verify that the IP address of the PC being used to configure the
router is on the same network as the router’s configuration IP
address. The default IP address of WE800G is 192.168.30.1. If
after initial set up, the PC that’s used to configure the WE800G
has been assigned a different IP address by DHCP or assigned a
different static IP address which is not on the same 192.168.30.x
network, it may be necessary to do one of the following two
things:

!

If the WE800G Configuration Manager needs to be accessed
“on-the-fly”. Write down the PC’s current IP address.
Temporarily change the PC’s IP address to static
192.168.30.10 (or something similar). Log into the WE800G.
Set the WE800G’s network address to DHCP or to a static
address that will be on the same network as the PC’s current
IP address and not a duplicate of any others on the network.
Record the new WE800G IP address (in case of DHCP, it can
be retrieved from the access point/wireless router after the
WE800G has restarted.) Restore the PC’s IP configuration.
Use the recorded new WE800G IP address to access the
WE800G Configuration Manager.

!

If the WE800G Configuration Manager only needs to be
accessed occasionally: Temporarily change the PC’s IP
address to static 192.168.30.10 (or something similar). Log
into the WE800G. After configuring the WE800G, log out.
Restore the PC’s IP configuration.

!

Verify you are entering the correct URL in the browser. The
default is

http://192.168.30.1

. If you think you have changed the

IP address used to configure the WE800G and cannot remember
it, you must reset the WE800G back to factory defaults. To do
this, press and hold the

reset

button for more the 5 seconds. This

clears the WE800G user settings, including User ID, Password,
IP Address, and Subnet mask.

!

Once the WE800G is reset to factory default, re-verify the
Ethernet connectivity and IP address issues.

«
...
62
63
64
65
66
...
»

Содержание WE800G - Wireless EN Bridge















































































Отзывы:

Нет отзывов

Похожие инструкции для WE800G - Wireless EN Bridge

xStack Storage DSN-4000 Series

Бренд: D-Link Страницы: 5

Бренд: Patton electronics Страницы: 8

Бренд: ADTRAN Страницы: 9

Бренд: ForeScout Страницы: 28

Sentry Global Security Modem

Бренд: Server Technology Страницы: 22

COMMWARE ECHO 5G

Бренд: pivotal Страницы: 2

Бренд: Airlink101 Страницы: 64

Бренд: ETAS Страницы: 29

Бренд: NetBurner Страницы: 30

Бренд: NetComm Страницы: 34

Бренд: Quantum Страницы: 108

CU8210-D001-0200

Бренд: Beckhoff Страницы: 25

Бренд: Network Instruments Страницы: 44

Бренд: SeaLevel Страницы: 25

Бренд: Alcatel-Lucent Страницы: 8

Бренд: NetApp Страницы: 10

Бренд: Billion Страницы: 261

Бренд: Magnescale Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды