Installation
Section 2
WE800G
2-7
9
Using a screwdriver, turn each screw until part of it protrudes
from the wall, as shown:
!
There must be 4.0 mm (.16 inches) between the wall and the
underside of the screw head.
!
The maximum distance from the wall to the top of the screw
head is 7.6 mm (.3 in).
4.0 mm
10.5 mm (.4 inches)
maximum
7.6 mm (.3 inches)
maximum
10
Remove the front two plastic feet, nearest to the LED panel, from
the bottom of the WE800G to uncover the keyholes.
11
Place the WE800G so the keyholes are above the mounting
screws.
12
Slide the Wireless Ethernet Bridge down until it stops against the
top of the keyhole opening.
13
Follow the procedures in “Electrical Connection to Wireless
Ethernet Bridge” located later in this section to connect the
WE800G.
