VT2400/VT2500 Series Voice Gateway User Guide
60
Overview Installation Troubleshooting
Contact
FAQ
Specifications Glossary License
Configuration:
Basic Advanced TCP/IP Wireless
Enable Logging
If you enable logging for the firewall, a list is always generated. Any IP address the firewall
determines to have breached the active policy is added to the log. The firewall blocks all
traffic to and from a denied IP address for 24 hours or until you reboot the
VT2400/VT2500
or manually clear the log on the
Firewall > LOG
page.
???????????
Select Service (
new
)
From the list, select
All Services
or a
single service
to which this new profile applies.
Protocol (
new
)
Select the protocol type for the service defined.
Destination Ports (
new
)
Specify the destination port range for this newly created service.
Allow Inbound (
new
)
Inbound direction indicates WAN to LAN. If you want the selected service to be allowed
from WAN to LAN, this check box must be selected
Allow Outbound (
new
)
Outbound direction indicates LAN to WAN. If you want the selected service to be allowed
from LAN to WAN, this check box must be selected
Buttons:
Add
Adds the profile to the
Firewall > FIREWALL — basic
page.
Move Down, Move to
Bottom
Allows you to prioritize rules by moving them up or down (one at a time) after you select
one in the list under RULES IN THIS PROFILE.
Delete
Deletes the profile after selecting it in the list under RULES IN THIS PROFILE. This
message appears: “
Name
Firewall Profile is about to be deleted. Are you sure?” Click
OK
to delete it or
Cancel
to keep it. Predefined firewall profiles (Low, Medium, High) cannot
be deleted
RULES IN THIS PROFILE
Service
The URL types covered by this profile
Protocol
The protocols covered by this profile
Port Range
The ports covered by this profile
Logging
Events are logged or are not logged
Enabled
The rule is enabledor not enabled
Allow 1B
???
Allow 0B
???
Firewall > FIREWALL — advanced page fields (continued)
Field
Description
