Overview Installation Troubleshooting
Contact
FAQ
Specifications Glossary License
Configuration:
Basic Advanced TCP/IP Wireless
VT2400/VT2500 Series Voice Gateway User Guide
6
As a troubleshooting aid, the
STATUS
,
LINE
1, and
LINE
2 indicators blink as follows during start-up and image
upgrades:
The WAN port has a dual color LED to indicate network traffic and connection speed:
LED Activity
Status LED
Line 1 or Line 2 LED
a
a. Line 2 is optional
None
N/A
Service is not present on the line
One blink
Performing its initial boot sequence
The line is off the hook
Two blinks
Obtaining its network IP address
N/A
Three blinks
Downloading its configuration profile
from your VoIP provider
N/A
Continuous
Downloading a firmware upgrade
initiated by your VoIP provider
Attempting to reregister with your VoIP provider
after interruption in service (PSTN failover - see
next table)
Solid
N/A
Successfully registered with your VoIP provider
LED Activity
WAN LED
Solid green
If there is a 100Base-T connection without activity
Solid amber
If there is a 10Base-T connection without activity
Blinking amber
If there is a 10Base-T connection with activity
Caution!
Never unplug your Motorola voice terminal while its light is blinking continuously.
Instead, allow the
image upgrade to finish. If you unplug the Motorola voice terminal during an image upgrade, it may
become inoperable.
