VT2400/VT2500 Series Voice Gateway User Guide
107
Overview Installation Troubleshooting
Contact
FAQ
Specifications Glossary License
Configuration:
Basic Advanced TCP/IP Wireless
Wireless > STATUS
You can use this read-only page to:
•
View the wireless interface status
•
Help perform
Troubleshooting
for wireless network problems
Wireless > STATUS Page Fields
Regulatory Domain
Indicates the country for which the
VT2500
is manufactured. The list of channels depends on the
country’s standards for operation of wireless devi
ces. Depending on the domain set at the factory,
USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
The
equipment version marketed in the United States is restricted to usage of channels 1 through 11
only.
ESSID
Displays the ESSID set on the
Wireless > NETWORK
page. For more information, see
“
Configuring the Wireless Network Name on the VT2500
”.
Never provide the ESSID to anyone
who is not authorized to use your WLAN.
Channel
Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the
Wireless > NETWORK
page.
RTS Threshold
Displays the Request to Send Threshold set on the
Wireless > NETWORK
page.
Frag Threshold
Displays the Fragmentation Threshold set on the
Wireless > NETWORK
page.
MAC Address
Displays the
VT2500
MAC address.
Security Mode
Displays the enabled wireless encryption type. For more information, see “
Configuring WPA on
the VT2500
” or “
Configuring WEP on the VT2500
”.
MAC Access Control
Displays the MAC Access Control setting (see “
Configuring a MAC Access Control List on the
VT2500
”):
•
Allow Listed — Only clients in the MAC access control list can access the WLAN.
•
Allow Any Station Access — Any wireless client can access the WLAN.
