Motorola VIP 1216, Руководство пользователя

Страница: 36 / 54

33
4. Press and release the
MUTE
key to save the setting. The selected mode key light will turn off indicating a successful
setup. The volume commands will be setup for the selected device regardless of the selected mode. If the selected
mode key light flashes for 3 seconds and turns off, then the selected mode will have no volume commands of its
own and will need to start over from step 1 above and select a different mode to program the device
Black MXv4 (with MTS logo) Remote::
1. Press and hold SETUP until the mode key blinks twice
2. Press the
VOL +
key
3. Press the mode key (
TV
,
DVD
, or
AUX
) that corresponds to the device you use for volume controls
4. 2 blinks = success; 1 long blink = failure
Volume Control Depends on Device Selected
The volume setting can also be reconfigured to independently control the volume associated with each device (e.g. In
AUX
mode the receiver controls the audio; in
TV
mode the TV controls the audio).
Silver/Charcoal Remote:
1. Press and hold the STB/MTS key and hold the OK key simultaneously on the remote control
2. Release both the STB/MTS key and the OK key – all the mode keys will flash twice indicating programming mode
3. Enter 955 by pressing the number keys on the remote control – the STB/MTS key will flash twice indicating correct
entry
4. Press the ENTER key – the STB/MTS key will flash tree times indicating successful assignment and return to normal
operations
Black MXv3 Remote:
1. Press the
TV
key and while holding it pressed, press the
OK
key for 1 second
2. Release both keys, all of the mode keys will flash followed by the TV mode key light remaining on
3. Press and hold the
MUTE key for 3 seconds until the TV mode key light briefly turns off then remains on, then
release the MUTE key
4. Press and release the MUTE key to save the setting. The TV mode key light turns off indicating successful setup.
The volume commands will now work for different devices
NOTE:
If a programmed mode key has no volume commands of its own, then the volume control will normally
operate the TV. If an invalid key is pressed, the selected mode key light flashes for 3 seconds and turns off. The
remote control returns to normal operation and you will need to start over.
If no key is pressed within 30 seconds, the remote control times out, the selected mode key light flashes for 3 seconds
and turns off. The remote control returns to normal operation at which time you can start over.
Black MXv4 (with MTS logo) Remote::
By default, the volume controls will control any device (TV, DVD, or AUX) depending on the mode selected. If you
have locked the volume to a single device and would like to enable volume to work on all devices, follow these
instructions.
To Cancel Volume Control Lock to a single device:
1. Press and hold
SETUP
until the mode key blinks twice
2. Press the MUTE key
3. Press the mode key ( TV , DVD , or AUX ) will blink 4 times upon successful unlock