Configuring a Vanguard Router
3-3
T0100-01, Revision B
Release 5.4
Configuration
Bridging
Configure these additional parameters or table records for bridging operation:
• Bridge Parameter
• Bridge Link Parameter
Other Bridge parameters are optional.
Note
Remember to set the “LAN Forwarder Type” parameter to BRID or BROUT.
This parameter is configurable under
Configure -> LAN Connection Table
.
Apple Talk
Configure these additional parameters or table records to support Apple Talk routing
over the Ethernet LAN:
• Apple Talk Parameter
• Zone Seed Table
• Apple Talk Interface
Note
Apple Talk can only be configured for point-to-point LCON (WANView). Set
the “LAN Connection Type” parameter to “Pt-to-Pt.” this parameter is
configurable under
Configure -> Configure LAN Connection Table
.
OSPF
Configure these additional parameters or table records to support OSPF routing:
• IP Interface
• IP Parameters
• OSPF Routing Parameters
• OSPF Interface
• OSPF Area Parameter
SoTCP
Configure these additional parameters or table records to support SoTCP:
• IP Interface
• SoTCP Map Table
• SoTCP Parameters
Note
When configuring the Route Selection Table, specify SOTCP as the destination
to which calls are routed.
Slim IP
Configure these additional parameters or table records to support Slim IP on the
Vanguard 6560, 6520, 200 and 100:
• SIP record
• SNMP Agent Configuration record