Motorola V8162, Руководство по обслуживанию

Страница: 33 / 93

Identity and Security
72X gain phase
Program AMPS (only) gain phasing values through the
handset.
Gain phasing depends on the call processing mode. It is
the responsibility of the user to select the proper call
processing mode before using this test command.
This command reprograms the EEPROM phasing values
for MOD, MIC, AUX, etc.
The value in X selects which step to start on. If no value for
X is entered, it will start at step 0.
The command keys are defined in Table 1: “Handset
Command Key Entry” on page 13.
NOTE: If you power down the radio after changes are
made, the power up sequence re-programs the hardware
with the correct phasing values.
Refer to the “Tests and Adjustments” on page 47 for
instructions on entering parameters from the keypad.
AMPS GAIN PHASING RANGE
STEP # PARAMETER (HEX)
00-04 MOD 0- MOD 4 0-7
05 Aux. audio path deviation 0-1
06 MIC audio deviation 0-F
07 DTMF deviation 0-3
08 Data deviation 0-3
09 SAT deviation 0-3
0A Discriminator audio gain 0-7
0B AFC WARP Analog 0-FF
Table 8:
Keypad
Entry
Command
Description
Status Display Result