Motorola V8162, Руководство по обслуживанию

Страница: 39 / 93

Identity and Security
0 Portable Data Logging (Bit B4). Enter 0.
0
Single Serving System Scan (Bit B3). This bit allows the user to enable
or disable the serving system scanning on serving systems other than the
phone’s home serving system. If the phone has an odd Home System
Identifier (Step 1), it’s home serving system is A, otherwise it is B. If Single
Serving System Scanning is enabled, only the home serving system will
be scanned, otherwise both serving systems will be scanned.
1 = enabled, 0 = disabled.
1
Auto Recall (Bit B2). When set to one, the user may access repertory by
a one or two digit send sequence (speed dialing).
0
Disable Service Levels (Bit B1). If set to 1, the service level (call
restric-tions)
cannot be changed by the user.
0
0 Lock Disable (Bit B0). When set to 1, the user cannot lock and unlock the
phone unit via the 3 digit lock code.
10 00000000
C OPTION BYTE The display for step 11 represents the status of eight
options, C7 through C0. C7 (msb) is programmed first followed by C6-C0.
Bits enter display on the right and scroll left.
0
User Mode NAM Programming Disable (Bit C7). When set to 1, User
Mode NAM programming cannot be accessed.
0
Dual NAM System Registration Enable (Bit C6). Enter 1 if dual NAM
operation is desired (for models capable of dual system operation).
Enter 0 for single NAM operation
0
Test Mobile Enable/Auto Answer (Bit C5). Enter 0.
0
Auto Redial Disable (Bit C4). When set to 1, the user cannot access the
6-minute auto redial feature.
0
Three Wire Bus Speaker Disable (Bit C3). This bit is used to disable
internal handset speaker when adding V.S.P. option. 1 = handset speaker
disabled,
0 = handset speaker enabled.
0
Bit not used (Bit C2). Enter 0.
0
Selectable System Scan Disable (Bit C1). When set to 1, the user
cannot select the primary system.
0
Diversity Antenna (Bit C0). (Extended systems only)
0 = Non-diversity, 1 = Diversity.
11 0334
AMPS Initial paging channel. There are 4 significant bits for the initial
paging channel. For system A enter 0333 and system B enter 0334.
Table 10:
Step
Factory
Default
Description