manualshive.com logo in svg

Motorola Symbol TC70, Руководство пользователя, Страница: 158 / 166

Поделиться
Скачать
Motorola Symbol TC70 Скачать руководство пользователя страница 158

7

If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to remove.

8

Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry before
applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity
requires less drying time.

Troubleshooting

The following tables provides typical problems that might arise and the solution for correcting the problem.

TC70

Table 20: Troubleshooting the TC70

Problem

Cause

Solution

When pressing the
power button the TC70
does not turn on.

Battery not charged.

Charge or replace the battery in the TC70.

Battery not installed prop-
erly.

Install the battery properly.

System crash.

Perform a reset.

When pressing the
power button the TC70
does not turn on but
two LEDs blink.

Battery charge is at a level
where data is maintained
but battery should be re-
charged.

Charge or replace the battery in the TC70.

Battery did not charge. Battery failed.

Replace battery. If the TC70 still does not operate, perform a
reset.

TC70 removed from cra-
dle while battery was
charging.

Insert TC70 in cradle. The 4,620 mAh battery fully charges in
less than six hours at room temperature.

Extreme battery tempera-
ture.

Battery does not charge if ambient temperature is below 0°C
(32°F) or above 40°C (104°F).

Cannot see characters
on display.

TC70 not powered on.

Press the 

Power

 button.

During data communi-
cation with a host com-
puter, no data transmit-
ted, or transmitted data
was incomplete.

TC70 removed from cra-
dle or disconnected from
host computer during
communication.

Replace the TC70 in the cradle, or reattach the communication
cable and re-transmit.

Incorrect cable configura-
tion.

See the system administrator.

Communication software
was incorrectly installed
or configured.

Perform setup.

During data communi-
cation over Wi-Fi, no
data transmitted, or

Wi-Fi radio is not on.

Turn on the Wi-Fi radio.

You moved out of range
of an access point.

Move closer to an access point.

Table continued…

158

 | Maintenance and Troubleshooting

Содержание Symbol TC70







































































































































































Отзывы:

Нет отзывов