Motorola StarTAC SC200, Руководство пользователя, Страница: 36 / 48

36 Help
12. Help
No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is
connected properly.
• Check that the mains power is connected properly and
switched on.
No display on the corded base
• Check that the mains power is connected properly and
switched on.
• Reset the base by disconnecting the mains power.
• Leave for a few seconds and reconnect.
No display on the cordless handset
• Check that the batteries are inserted correctly and fully
charged. Use only approved rechargeable batteries
supplied.
• Check that the handset is switched on. Press and hold
.
• Reset the base by removing the batteries and
disconnecting the mains power. Wait for around 15
seconds before connecting it again. Allow up to one
minute for the handset and base to synchronize.
11.2.5 Delete an entry
1. Press to open the Calls list.
2. Scroll or to the entry you want to delete.
3. Press
and scroll to DELETE . Press .
4. The display shows DELETE? .
5. Press to confirm or to cancel.
11.2.6 Delete the entire Calls list
1. Press to open the Calls list.
2. Press
and scroll to DELETE ALL . Press .
3. The display shows DELETE? .
4. Press to confirm or to cancel.
NOTE
Deleting a single entry or the entire calls list on an individual
handset will not affect the base or any other handset
registered to the base, to delete the calls list entries on the
base, see page 19.