29
28
● Pressing
with a person to call selected connects the call to the number set
to
‘Main Number’among the items with phone numbers stored.
● Press
on the idle mode. You can search phone numgers with
‘N a m e’,
‘G r o u p’or
‘T u r b o’in the Phonebook.
Select a person to call ▶Select an item to call ▶
● The displaying China Unicom and user-set graphic. And then, the initial screen is displayed.
Power ON
Power OFF
Press and hold
Press and hold
● The graphic disappears and the power is turned off.
● A graphic can be downloaded from UNI and changed in
‘MainLCD Graphic or SubLCD Graphic’Display Graphic may be
displayed late depending upon the capacity of the downloaded graphic.
Enter a desired area code and phone number ▶
Basic Operation
Basic Operation
● The phone automatically redials if the call is not connected. If you press an incorrect number, you can
correct the number with
.
● If the phone is locked, you should enter the password to make a call.
● Call Time is automatically displayed on the LCD. The call charge is calculated from the time the called
party receives your call.
1. Power ON and OFF
2. Placing a Call
Use search to select a desired person to call. (see P.115~117 Searching Phone Number)
Placing a call from Phone Book
If a number is registered in
‘Turbo Dial’
, press and hold
‘Turbo Dial’on the main screen to make a call to the number.
(location number is 17, Press the dial button
and press and hold
)
Turbo Diali n g
Enter Phone Number ▶ E n t e r
‘P’or
‘T’
and then a number to be dialed electronically ▶
Input key
P
T
Operating Method
The numbers after
‘P’
can be sent only if the
[TAP] is pressed.
The numbers after
‘T’
are sent shortly after
You can use this function conveniently by entering a few numbers in advance according to the audio announcement when using
ARS(for telebanking service or voice message confirmation). To cancel electronic dial, press [ C A N C E L ] .
Electronic Dialing
