23
22
Before Using
Before Using
Cell Phone and Battery
①Pull battery cover in the front direction
while pressing the removal button
②Insert battery and fit the battery cover
correctly into the groove provided on the
bottom-hand side of the handset
③ Slide it all the way in the arrow direction until
a
‘c l i c k’is heard.
① Pull in the frornt direction while pressing the
removal button.
② Open the battery cover and push the both part in
the arrow direction and the removal the battery
from the handset.
①
②
①
②
③
7. How to Use Battery
The Battery and UIM Card
I .
Installing UIM Card on the Phone
Disconnect the battery pack from the phone and side UIM Card into the rail
on the back of the phone.
NOTE!!
UIM Card ?
UIM Card contains your Phone Number, service details, and phonebook/message memory,
Caution
: Do not bend or scratch your UIM Card. Avoid exposing your UIM Card to static electricity, water, or dirt.
Charging Battery Pack
The battery is not fully charged when it is supplied. Be sure to charge the battery fully before
you use the phone.
● Connect the power plug of the charger to the outlet.
● Connect the jack of the charger to the port on the side of the phone.
■ When you use USB Hub device to use charging battery, data service or mPT, it must be
restricted as following,
1. USB hub must match USB Power Distribution Specification.
2. Use USB hub with self-power as possible.
3. When you want to charge your phone with USB, it is recommended to use PC host root hub.
4. When you want to charge with hub that is not match spec., only one port must be used.
I .
A s s e m b l i n g
II.
R e m o v a l
※Before removal the battery, be sure to turn off the power of the phone. Forcible removal of the battery may cause
malfunction. Cell phone and battery cover shall be always combined.