Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
63
574702-001 a
This document is uncontrolled pending incorporation in a Motorola CMS
d12 User Setting Status
This diagnostic displays the user settings. The format may vary. The information on the
OSD and front panel is updated when you display the diagnostic.
The User Setting Status fields are:
Setting
Description
TV Type
Allows you to specify the style of television connected to the QIP set-top. Options
include 16:9, 4:3 LETTERBOX, and 4:3 PAN SCAN. The 16:9 option is the default
selection. The options are used as follows:
•
16:9 designates that a widescreen television is connected to the QIP set-top.
•
4:3 LETTERBOX designates that a standard screen television is connected to the
QIP set-top and that widescreen programs should be scaled to fit the screen with
black bars above and below the picture.
•
4:3 PAN SCAN designates that a standard screen television is connected to the
QIP set-top and that widescreen programs should be cropped so that the picture
fills the entire screen.
HDMI/YPbPr
Output
Allows you to specify the video output format of the QIP set-top for all content
(when the 4:3 override setting is Off) or for all 480p, 720p, and 1080i content (when
the 4:3 override is used). Options include 1080i, 720p, 480p, and 480i. By default,
the 1080i option is selected. The options are used as follows:
•
1080i — The QIP set-top will present programs in the High-Definition 1080i
format (1920 x 1080 pixels).
•
720p — The QIP set-top will present programs in the High-Definition 720p format
(1280 x 720 pixels).
•
480p — The QIP set-top will present programs in the Enhanced-Definition 480p
format (720 x 480 pixels).
•
480i — The QIP set-top will present programs in the Standard-Definition 480i
format (720 x 480 pixels).
Some televisions only support certain video formats. Please consult your
television’s user manual for more information on format compatibility.
The QIP set-top can detect when the HDMI connection is in use. If you are not
using the HDMI connection on the QIP set-top, the HDMI/YPbPr Output setting will
display as YPbPr Output in the User Settings Menu.
