Motorola PPC/CPCI-690, Справочное руководство

Страница: 87 / 176

PowerBoot Command Set
PPC/CPCI-690 4 - 13
Display Information on the board’s PCI bus structure devshow 4-29
Supported I2C EEPROMs on the board eeprom_info 4-31
Help message help 4-31
HID0/1, MSR and L2CR register values hid 4-32
Information on the on-board IPMI controller ipmi_info 4-33
Memory contents md 4-33
Board temperature temp 4-34
Exchange
Data Make PCI configuration read to a specific PCI
location config_rd 4-35
Make a PCI configuration write to a specific PCI
location config_wr 4-36
Read data from the on-board EEPROMs eeprom_read 4-37
Write data to an on-board I2C EEPROM eeprom_write 4-38
Program flash memory fprog 4-39
Send values to the IPMI controller ipmi_request 4-41
Load s-records into memory lo 4-41
Load binary image from a remote system via
network interface netload 4-43
Save a memory area via TFTP into a file on a
host system. netsave 4-45
Reset Hardware reset hreset 4-47
Software reset reset 4-48
Miscella-
neous Fill a memory area with values or an ASCII
string bf 4-49
Search memory areas for values or an ASCII
string bs 4-50
Compare two memory areas bv 4-51
Erase flash memory devices ferase 4-52
Start binary image located in DRAM memory go 4-53
Table 12: Command Set Overview
Task Command Page