manualshive.com logo in svg

Motorola PPC/CPCI-690, Справочное руководство

Поделиться
Скачать
Motorola PPC/CPCI-690 Скачать руководство пользователя страница 144

Device Bus

Buses

5 - 16

PPC/CPCI-690

 

Temperature Sensor

The board provides the temperature sensor LM75.

Figure 17:

Location of Temperature Sensor

The temperature sensor is connected to the IPMI controller’s I2C bus 3 and 
can be configured and read via the IPMI controller. The Motorola IPMI 
firmware already provides sensor data records (SDRs) containing sensor 
configuration data such as temperature threshold values. To check how 
many SDRs are provided, use the IPMI command “Get Device SDR Info” 
together with the API of the Motorola VxWorks IPMI driver. To read the 
SDRs into your system management software, use the IPMI command “Get 
Device SDR”. To add the provided SDRs to the repository use the IPMI 
command “Add SDR”.

The temperature values can be read via the Master Write-Read I2C IPMI 
command and the I2C slave address together with the API of the Motorola 
VxWorks IPMI driver and via the Get Sensor Reading command.

For further information, refer to the VxWorks 5.4/Tornado 2.0 BSP Rel. 2-1 In-
stallation Guide and Release Notes and the IPMI Specification V. 1.0.

Содержание PPC/CPCI-690

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды