Motorola PMMN4095 series, Руководство пользователя

Страница: 5 / 606

FOREWORD
English
iii
NOTE:
The Dual-Unit Charger is not designed to accommodate the
alkaline battery tray.
OPERATIONAL SAFETY GUIDELINES
Dual-Unit Charger PMLN6714_
•
This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
•
Ensure the WRSM with attached battery or battery alone is dry before
inserting into the Dual-Unit Charger.
•
Connect equipment only to an appropriately wired power supply of
the correct voltage (as specified on the product). Disconnect from line
voltage by removing main plug.
•
The socket outlet to which this equipment is connected should be
close by and easily accessible.
•
Maximum ambient temperature around the Dual-Unit Charger
equipment must not exceed 50 °C (122 °F).
•
Output voltage from the power supply unit must not exceed the
ratings stated on the product label located on the power supply.
•
Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
Vehicular Charger PMLN6716_
•
Equipment shall be used in vehicle and in dry condition. Keep in mind
that rain or snow can reach the equipment i.e. through an open
vehicle window.
•
Ensure the WRSM with attached battery or battery alone is dry before
inserting into the Vehicular Charger.
•
Connect equipment only to an appropriately vehicle’s cigar lighter
socket of the correct voltage (as specified on the product).
Disconnect from line voltage by removing the CLA.
•
Maximum ambient temperature around the Vehicular Charger
equipment must not exceed 60 °C (140 °F).
•
Output voltage from the vehicle’s cigar lighter socket unit must not
exceed the ratings stated on the product label located at the back of
the charger.
•
Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
Table 1.1: Motorola Authorized Battery
Kit (Part) Number Platform/Description
PMNN4461_ Battery Standard Li-Ion 1750M1880T

