PageWriter
TM
2000 User’s Manual
78
deleted is discussed in “Memory Management System” on
page 68.
Battery and Charger
The charger’s LED doesn’t light. What should I
do?
Use the following procedure to find the cause:
1. Check that your pager, or the battery alone, is inserted into
the charger correctly. See “The Battery and Charger” on
page 10 for instructions.
2. Unplug the transformer from the AC power supply.
3. Remove the pager (or battery) from the charger, then use an
ordinary pencil eraser to clean the six metal contacts on the
charger and the pager (or battery).
4. Plug the transformer back into the AC power supply to
restore the power.
5. Re-insert the pager or battery into the charger. If the
charger’s LED still does not light, have the charger checked
by an authorized service technician.
What does a flashing red indicator light on the
charger mean?
The red flashing indicator light can mean one of four situations:
•
The battery or pager may be seated improperly in the
charger. Ensure the battery or pager is properly inserted.
•
The battery voltage has remained low for too long a period
of time and the battery cannot be recharged. Dispose of the
battery properly and purchase a new battery.
•
The battery temperature is outside the normal charging
range. Remove the battery and re-insert. If flashing
continues, remove the battery, wait one hour, and re-insert.
If flashing continues replace battery or have the charger
checked by an authorized service technician.
•
Insufficient power is being delivered by the transformer.
Plug the transformer into another power source.
•
If the insufficient power is not corrected by changing the
power source, the charger might be malfunctioning. Have
the charger checked by an authorized service technician.
Содержание PageWriter 2000
Страница 1: ...A PageWriterTM 2000 User s Manual ...
Страница 4: ......
Страница 86: ...PageWriterTM 2000 User s Manual 80 ...