Motorola MVME167P, Инструкция по установке и эксплуатации

Страница: 92 / 120

A-2 Computer Group Literature Center Web Site
Specifications
A
Cooling Requirements
The Motorola MVME167P VME single-board computer is specified,
designed, and tested to operate reliably within an incoming air temperature
range of from 0° C to 55° C (32° to 130° F) with forced air cooling of the
entire assembly (base board and mezzanine, if present) at a velocity
typically achievable by using a 100 CFM axial fan. Temperature
qualification was performed in a standard Motorola VME system chassis.
Twenty-five-watt load boards are inserted in two card slots, one on each
side, adjacent to the board under test, to simulate a high power density
system configuration. An assembly of three axial fans, rated at 100 CFM
per fan, is placed directly under the VME card cage. The incoming air
temperature is measured between the fan assembly and the card cage,
where the incoming airstream first encounters the module under test. Test
software is executed as the module is subjected to ambient temperature
variations. Case temperatures of critical, high power density integrated
circuits are monitored to ensure component vendors’ specifications are not
exceeded.
While the exact amount of airflow required for cooling depends on the
ambient air temperature and the type, number, and location of boards and
other heat sources, adequate cooling can usually be achieved with 10 CFM
(490 LFM) flowing over the module. Less airflow is required to cool the
module in environments having lower maximum ambients. Under more
favorable thermal conditions, it may be possible to operate the module
reliably at higher than 55° C with increased airflow. It is important to note
that there are several factors, in addition to the rated CFM of the air mover,
Physical Dimensions
Base board
Height Double-high VME board, 233 mm (9.2 in.)
Front panel width 20 mm (0.8 in.)
Front panel height 262 mm (10.3 in.)
Depth 160 mm (6.3 in.)
Table A-1. MVME167P Specifications (continued)
Characteristics Specifications