Procedure:
1
Use one of the following options:
Option
Actions
The radio is in RMS mode
Go to
.
The radio is not in the
RMS mode
a
Perform one of the following actions:
• From the home screen, press
Menu
→
Messag-
es
→
Send RMS/FMS
.
• Press and hold the One Touch Button configured to
display the
Send RMS/FMS
menu.
• Use a menu shortcut assigned to the
Send RMS/FMS
menu.
b
Go to
NOTE:
The navigation through the radio menu is only available if your service provider
enabled the
Send RMS/FMS
menu item. However, your service provider can configure
a One Touch Button to display the
Send RMS/FMS
menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the
Send RMS/FMS
menu item is disabled, and no
One Touch Button is configured to display the
Send RMS/FMS
menu, then the radio can
only receive RMS messages but cannot send them.
2
Perform one of the following actions:
• Press and hold a required key (for RMS status 0–9).
• Press the required two keys combination (for RMS status 10–99).
• Scroll to the required RMS status.
• Type out a message using RMS Free Text (available in SDS-TL only).
4.3.11
Additional Address
The Additional Address feature allows the radio to send Radio Messaging System (RMS) messages
and Local Information Protocol (LIP) reports to additionally defined recipients.
The default addresses for the RMS messages and LIP reports are defined by your service provider.
RMS messages and LIP reports are also sent to selected and enabled additional address.
You can create, edit, and delete additional addresses using the radio menu. For service provider-
configured additional addresses, your service provider can disable the editing and deletion of the
additional addresses.
You can define up to 30 additional addresses.
4.3.11.1
Enabling or Disabling Additional Address
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Messages
→
Additional Address
→
Enable
.
3
Select one of the following options:
• To activate the feature, select
On
.
MN005826A01-AE
Chapter 4 : Main Menu
82