Motorola ML910, Руководство пользователя

Страница: 138 / 182

8-12 Troubleshooting
Power Management Problems
The computer does not enter standby/sleep mode automatically.
l
When your computer is connected to another device, it may not enter standby/sleep
mode if the connection is actively in use.
l
Make sure the standby/sleep time-out is enabled.
The computer does not enter standby/sleep mode immediately.
l
If the computer is busy performing tasks, it will only enter standby/sleep mode after
completing the tasks.
The computer does not resume from standby/sleep mode.
l The computer automatically enters standby/sleep mode when the battery pack drops
to 3% of being fully discharged. Perform one of the following:
−
Connect the AC adapter to the computer.
−
Replace the empty battery pack with a fully charged one.
The computer does not enter sleep mode with the Fn+F10 hot keys.
l
Make sure the sleep function is specified on the sleep button.
Software Problems
An application program does not work correctly.
l
Make sure the software is correctly installed.
l
If an error message appears on the screen, consult the software’s documentation for
further information.
l
If you are sure the operation has stopped, reset the computer. (See “Resetting the
Computer” later in this chapter.)
l
Use “Task Manager” by pressing Ctrl + Alt + Del to close the error application.