27
11.6 Call Waiting Caller ID
This feature allows you to see who is calling when you hear the call waiting beep. The caller
identification information appears in the display after you hear the tone.
1. To connect to the waiting call, press
FLASH
and your first call will be put on hold.
2. To switch between the two calls, press
FLASH
.
IMPORTANT
To use all the features of this unit, you must subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To know who is calling while you are on the phone,
you must subscribe to Caller ID with Call Waiting Service.
12
Directory and One-Touch Memory Log
You may store data in the Directory (up to 99 records) or the One-Touch Memory (10 buttons
located to the right of the number pad on the base). The Directory and each One-Touch Memory
Log stores up to 16 characters and 32 digits.
The records in the Directory are stored by alphabetic ascending order.
12.1 Adding a New Directory Record
1. In idle mode, press
DIR
.
2. Press
NEW
softkey. The screen displays
ENTER NAME:
.
3. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter “Lorraine,”
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press
DIR
or
CID
of the navigation button to move the cursor forward or
backward. Or, press
CLEAR
softkey to delete one character at a time.
The name field cannot be left empty.
4. Press
SAVE
softkey. The screen displays
ENTER NUMBER:
.
5. Use the dial pad to enter a telephone number.
Press
j
twice to insert a pause in a number if necessary.
6. When you are finished, press
SAVE
softkey.
7. Using
VOL +
and
VOL -
of the navigation button to scroll to the desired
VIP TONE MELODY
.
8. Press
SELECT
softkey to complete.
NOTE
If an incoming call number matches this record the VIP Tone Melody will ring.
If
MEMORY FULL
shows in the display, you need to delete one or more records before repeating
above steps to add a new directory record.
12.2 Adding a Record in the One-Touch Memory Log
1. In idle mode, press
STORE
softkey.
2. The screen displays
SELECT BUTTON LOCATION
.
3. Press a
One-Touch Memory (1-10)
button to save the record in that memory location.
If there is a record stored in selected memory location. Press
REPLACE
softkey to confirm
overwrite or press
BACK
softkey, then repeat the step 1-3 to select a new location.
4. The screen displays
ENTER NAME:
.
5. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter “Lorraine,”
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press
DIR
or
CID
of the navigation button to move the cursor forward or
backward. Or, press
CLEAR
softkey to delete one character at a time.
The name field cannot be left empty.
6. Press
SAVE
softkey. The screen displays
ENTER NUMBER:
.
7. Use the dial pad to enter a telephone number.
Press
j
twice to insert a pause in a number if necessary.
