20
NOTE
‘Toll Saver’ can save you the cost of a call when you access your message from another phone.
•
If you have new messages, the unit answers after the 3
rd
ring.
•
If you have no new messages, the unit answers after the 5
th
ring.
•
You can hang up after the 3
rd
or 4
th
ring and save the pay telephone or long distance charge.
7.7.7 Message Length
From the
ANSWERING SYS.
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
MESSAGE LENGTH
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
LINE 1
or
LINE 2
and press
SELECT
softkey.
3. Using
VOL +
and
VOL -
of the navigation button to scroll to
1 MINUTE, 2 MINUTES
or
3 MINUTES
.
4. Press
SELECT
softkey to save your selection.
7.7.8 Call Screening
If you wish incoming messages to be played over the speakerphone, activate the Call Screening
feature. To take the call, press the corresponding
LINE
button and the Answering System will
stop recording.
From the
ANSWERING SYS.
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
CALL SCREENING
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
7.7.9 Message Alert
This feature set your Answering System to give an alert tone every 10 seconds when there are
new messages.
From the
ANSWERING SYS.
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
MESSAGE ALERT
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
7.7.10 Remote Password
You can access the Answering System from a tone dialing telephone in another (remote) location.
To do this, you must turn on the remote function and set a three-digit remote password.
The remote password is required for remote access, and it prevents unauthorized access to your
Answering System.
From the
ANSWERING SYS.
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
REMOTE PASSWORD
. Press
SELECT
softkey.
2. The base will display the last-set remote password (or, if the device is new or has been reset to
default, the base will display 000).
3. Press
CLEAR
softkey to delete the current remote password.
4. Using the dial pad to enter your new 3-digit remote password.
5. When you are finished, press
SAVE
softkey.
7.8
Restore Settings
The feature allows you to reset some menu settings to the original default settings.
1. In idle mode, press
MENU
softkey to go to the main menu.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
RESTORE SETTINGS
. Press
SELECT
softkey.
3. The screen will display
LOAD TO DEFAULT?
.
