manualshive.com logo in svg

Motorola ME-560M, Руководство пользователя, Страница: 56 / 58

Поделиться
Скачать
Motorola ME-560M Скачать руководство пользователя страница 56

Make/Break Ratio

The ratio of the off-hook (make) to on-hook (break) interval is the make/break
ratioin pulse dialing.

Modem

A combination of the words MOdulator and DEModulator. Modems transform
digital data into analog signals and back again.

Nonvolatile Memory 

An area of memory inside the modem where the default configuration profile is
stored. Values recorded in this memory will not be lost when the power is turned
off.

Off-Hook 

The condition when the modem has picked up the telephone line.

Off-Line Command State -  

A modem state in which the modem accepts, interprets and executes

commands from an asynchronous computer or terminal.

On-Hook 

The condition when the modem has not picked up the telephone line; the
telephone is hung up.

On-Line 

A carrier signal link with a remote modem has been established; communication
is in progress.

On-Line State -

A modem state in which the modem is connected with a remote modem. Data
can be sent or received from the remote modem in this state. No commands will
be accepted from the modem except the escape command which will bring the
modem into the on-line command state.

On-Line Command State -  

A modem state in which the modem can accept or execute commands

from an asynchronous computer or terminal while remaining connected with the
remote modem. The user can return the modem to the on-line state by issuing the
AT0n command or put it into the off-line command state by issuing command
such as ATZ or ATH.

Parity 

An error-checking method by which the modem verifies that the data just sent is
correct.

PPS 

Pulse per second.

Profile

A list of default settings.

Protocol

A technical specification for serial communications; the protocols supported by
the modem are listed in Appendix B.

PSK

Phase Shift Keying.

Pulse Dialing 

A dialing form in which each digit is represented by a series of pulses. Rotary
telephones all use pulse dialing.

QAM

Quadrature Amplitude Modulation.

Result Codes

The response the modem returns to the screen upon executing a command.

RAM

Random Access Memory.

Содержание ME-560M



























































Отзывы:

Нет отзывов