Motorola ME-560M Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 58

Motorola ME-560M Скачать руководство пользователя страница 35

Range:

2 - 255 seconds.

Default:

2

S7

Wait for Carrier after Dial

S7 controls how long the modem waits for a carrier signal from a remote modem after
originating a call or from the calling modem after going off-hook when answering a call.

S7 also controls how long the modem waits for a one-second continuous dialtone after dialing a
number followed by the W dial modifier. If the modem detects a one-second continuous
dialtone within the specified wait time, it proceeds to dial.

Range:

1 - 255 seconds.

Default:

50

S8

Pause Time for Comma

S8 controls how long the modem pauses when a comma ", " is encountered in a dial string
while executing a dial command.

Range:

0 - 255 seconds.

Default:

2

S9

Carrier Detect Response Time

S9 determines how long a carrier signal must be present for the modem to confirm it. The
longer the response time, the easier it is for the modem to correctly recognize a carrier without
mistaking other signals or transient noise on the line as a carrier.

Range:

1 - 255 tenths of a second.

Default:

6 (0.6 second)

S10

Delay between Loss of Carrier and Hang-Up

S10 determines the delay time between the loss of a carrier from the remote modem and hang-
up. This allows for a temporary loss of carrier without causing the local modem to disconnect.
When S10 is set to 255, the modem functions as if a carrier is always present.

The actual interval the modem waits before disconnecting is the value in S10 minus the value in
S9. Therefore, the value in S10 must be greater than that in S9, or else the modem disconnects
before it recognizes the carrier.

Range:

1 - 255 tenths of a second.

Default:

14 (1.4 seconds)

S11

DTMF (Touch-tone) Tone Duration

S11 determines the duration and spacing of tones for Dual Tone Multifrequency (DTMF)
dialing. This value has no effect on pulse dialing.

«
...
33
34
35
36
37
...
»

Содержание ME-560M



























































Отзывы:

Нет отзывов