manualshive.com logo in svg

Motorola ME-560M, Руководство пользователя, Страница: 50 / 58

Поделиться
Скачать
Motorola ME-560M Скачать руководство пользователя страница 50

OK           n=0 or 2.

ERROR

Otherwise.

Inquiries  :

#CID?         Retrieves the current Caller ID mode from the modem.

#CID=?        Returns the mode capabilities of the modem in a list with each element separated by commas.

Formatted Form Reporting

The modem presents the data in the <tag>=<value> pair format as described in the table below.Spaces are
present on both sides of the equal sign.

TAG

Description

DATE     

DATE=MMDD where MM is the month number(01 to 12) and DD is the day 
number (01..31).

TIME     

TIME=HHMM where HH is the hour number (00 to 23) and MM is the minute 
number (00  to 59).

NMBR     

NMBR=<number> or P or O where <number> is the telephone number of the 
caller,where P indicates that the calling number information is not available 
since the originating caller has requested private service, and where O 
indicates that the calling number information is not available or out of service 
at the calling location.

NAME     

NAME=<listing name> where <listing name> is the subscription name.

MESG     

MESG=<data tag><length of message><data><checksum> in printable ASII
hex numbers. This tag indicates a data item not listed above. The message is
only possible for Multiple Message Format.

  

Notes:

1. The modem does not present any Caller ID information if the DCE detects a checksum error in

the Caller ID packet.

   
2.   In the event of an unrecognized data tag, the modem will present the data in ASCII hex

numbers following the MESG tag.

Example of Formatted Form Reporting

1.  The following example illustrates the standard Caller ID message packet.

RING

      

DATE = 0321

     

 

TIME = 1405

      

NMBR = 504551234

      

NAME = A N OTHER

      

RING

      

RING

2. The following example illustrates the case where the tag of the packet is not recognized by the

modem.

      

RING

Содержание ME-560M



























































Отзывы:

Нет отзывов