Motorola MCU M68MPB916R3, Руководство пользователя

Страница: 39 / 62

MEVB SUPPORT INFORMATION
M68MPB16R3UM/D 4-7 7
Table 4-7. Logic Analyzer Connector J13 Pin Assignments (continued)
Pin Mnemonic Signal
7 DS DATA STROBE – Active-low output signal. During a
read cycle, indicates that an external device should
place valid data on the data bus. During a write
cycle, indicates that valid data is on the data bus.
8 BR /
CS0
BUS REQUEST – Active-low input signal that
indicates an external device requires bus mastership.
CHIP SELECT 0 – Output signal that selects
peripheral or memory devices at programmed
addresses.
9 BG /
CSM
BUS GRANT – Active-low output signal that indicates
the MCU has relinquished the bus.
INTERNAL MODULE CHIP SELECT – Active-low
output signal that selects an external emulation
device at internally-mapped address.
10 CSBOOT BOOT CHIP SELECT – An active-low output chip
select for external boot startup ROM
11 CLKOUT SYSTEM CLOCK OUTPUT – MCU internal clock
output signal.
12 A23 /
CS10
E
ADDRESS BUS BIT 23 – One bit of the 24-bit
address bus.
CHIP SELECT 10 – Output signal that selects
peripheral or memory devices at programmed
addresses.
EXTERNAL CLOCK – M6800 bus clock output.
13 A22 /
CS9
ADDRESS BUS BIT 22 – One bit of the 24-bit
address bus.
CHIP SELECT 9 – Output signal that selects
peripheral or memory devices at programmed
addresses.
14 A21 /
CS8
ADDRESS BUS BIT 21 – One bit of the 24-bit
address bus.
CHIP SELECT 8 – Output signal that selects
peripheral or memory devices at programmed
addresses.