Motorola MC9500-K - Win Mobile 6.1 806 MHz Скачать руководство пользователя страница 33

Страница: 33 / 284

Getting Started 1 - 11

Removing the SIM Card

To remove an SIM card:

If the MC9500-K is in suspend mode, press the red

Power

button to wake the device.

Press the red

Power

button to suspend the MC9500-K.

Wait for red Decode LED to turn on and then turn off.

Unhook the handstrap.

Remove the battery.

Remove the SIM card cover using the end of the stylus.

Slide the SIM card holder door to the left to unlock.

Lift the SIM card holder door.

Remove SIM card from holder.

10.

Close the SIM card holder door.

11.

Slide the SIM card holder door to the right to lock into place.

12.

Align the SIM card cover over the access hole and press down until it snaps into place.

13.

Replace the battery.

CAUTION

Suspend the MC9500-K prior to removing the battery. Failure to properly remove the battery may cause

the MC9500-K to cold boot and potential loss of data.

NOTE

On devices with OEM version 01.19.11 and higher, a dialog box appears when pressing the Power button.

See

Removing the Battery on page D-18

for more information.

Содержание MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Бренды по названию

Популярные бренды

Motorola MC9500-K - Win Mobile 6.1 806 MHz, Руководство пользователя

Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Бренды по названию

Популярные бренды