Motorola MC9500-K - Win Mobile 6.1 806 MHz Скачать руководство пользователя страница 32

Страница: 32 / 284

1 - 10 MC9500-K Mobile Computer User Guide

Figure 1-12

Removing the Battery

Lift the battery from the MC9500-K.

Insert the replacement battery, top first, into the battery compartment in the back of the MC9500-K.

Press the battery down until the battery release latches snap into place.
The MC9500-K powers up after inserting the battery.

Removing the microSD Card

To remove an microSD card:

If the MC9500-K is in suspend mode, press the red

Power

button to wake the device.

Press the red

Power

button to suspend the MC9500-K.

Wait for red Decode LED to turn on and then turn off.

Unhook the handstrap.

Remove the battery.

Remove the SD card cover.

Slide the SD card holder door to the left to unlock.

Lift the microSD card holder door.

Remove microSD card from holder.

10.

Close the microSD card holder door.

11.

Slide the microSD card holder door to the right to lock into place.

12.

Align the SD card cover over the access hole and press down until it snaps into place.

13.

Replace the battery.

Battery Latch

CAUTION

Suspend the MC9500-K prior to removing the battery. Failure to properly remove the battery may cause

the MC9500-K to cold boot and potential loss of data.

NOTE

On devices with OEM version 01.19.11 and higher, a dialog box appears when pressing the Power button. See

Removing the Battery on page D-18

for more information.

Содержание MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Бренды по названию

Популярные бренды

Motorola MC9500-K - Win Mobile 6.1 806 MHz, Руководство пользователя

Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Бренды по названию

Популярные бренды