Motorola MC9190-G, Руководство интегратора

Страница: 167 / 190

Using iDockIt B - 15
If the host computer or ActiveSync is reset, the port selection may revert to COM1. Open Connection Settings
and re-select the correct USB COM port.
Modem Tab
If using a modem cradle, you can automatically connect to a remote host computer or network or you can choose a
host computer with which you have set up a partnership using ActiveSync. Alternatively, you can connect to your
network and/or launch a specified application on the MC9190-G.
Figure B-9
Modem Settings Tab
• Launch ActiveSync - Launch ActiveSync when the MC9190-G is placed in a modem cradle.
•
Sync with -
Synchronizes data with the host computer that is directly connected to the remote modem. To
synchronize with a different host computer, check this option and select the host computer in the list.
•
Disconnect after sync -
Disconnect automatically from the selected host computer when ActiveSync has
completed synchronization.
• Establish network connection - Establish a network connection when the MC9190-G is placed in a modem
cradle. iDockIt uses the modem connection specified in the
Connect using
drop-down list.
Selecting this option automatically deselected
Launch ActiveSync
.
You can check this option in conjunction with
Launch application
. After iDockIt establishes the network
connection, it launches the specified application.
• Launch application - Launch the selected application when the MC9190-G is placed in a modem cradle.
iDockIt uses the specified command line parameters.
If
Establish network connection
is checked the application does not be launched until a connection is
successfully established.
1.
Tap
Select
to open the
Select Auto-Launch Application
window.
2.
Select a File Type in the drop-down list.
3.
Select a folder (as needed).
4.
Use the input panel to specify command line parameters.
NOTE
Selecting this option automatically deselects Establish network connection and Launch application .
Similarly, selecting Establish network connection or Launch application automatically deselects Launch
ActiveSync .