Motorola M68HC11EVBD, Руководство пользователя

Страница: 68 / 110

OPERATING INSTRUCTIONS
4-22 M68HC11EVBU/D
MD Memory Display
4.6.10 Memory Display
MD [<address1> [<address2>]]
where:
<address1> Memory starting address (optional).
[<address2>] Memory ending address (optional).
The MD command lets you display a block of user memory beginning at address1 and continuing
to address2. If address2 is not entered, 9 lines of 16 bytes are displayed beginning at address1. If
address1 is greater than address2, the display defaults to the first address. If no addresses are
specified, 9 lines of 16 bytes are displayed near the last memory location accessed.
Each displayed line of memory consists of a four digit hexadecimal address (applicable to the
memory location displayed), followed by 16 two digit hexadecimal values (contents of the
sixteen memory locations), followed by the ASCII equivalents (if applicable) of the the 16
memory locations. Since not all 8-bit values correspond to a displayable ASCII character, some
of the character positions at the end of a line may be blank.