Motorola iDEN i580 Скачать руководство пользователя страница 86

Страница: 86 / 107

FIELD LEVEL TEST MODES AND PROCEDURES:

Reset Log Test

68P80401P05

8.12

Reset Log Test

Use this test to check the reset log in the unit.

To perform the reset log test:

Power on the unit and wait until registration is complete.

If the unit does not have the latest software version, reflash (reprogram) the unit.

If the unit attempts to reset, perform the Reset test (see page 8-11).

Enter Trace Mode (see page 6-1). The

Unit Info

display appears.

Scroll down and highlight

Resets

, and then press

View

to view the

Resets

display.

Look for and record any reset errors.

If the log contains reset errors, perform the Reset test.

Place a dispatch call.

Look for, and record, any reset errors.

If the unit attempts to reset, perform the Reset test.

Place an interconnect call.

Look for and record any reset errors.

If the unit attempts to reset, perform the Reset test.

NOTE:

If the customer agrees, set the Auto Lock feature. This feature helps detect reset
conditions.

Содержание iDEN i580











































































































Результаты поиска

Содержание iDEN i580

Отзывы:

Бренды по названию

Популярные бренды

Motorola iDEN i580, Руководство по обслуживанию на месте

Результаты поиска

Содержание iDEN i580

Отзывы:

Бренды по названию

Популярные бренды