Motorola i760, Руководство по обслуживанию на месте

Страница: 54 / 112

BASIC LEVEL TEST MODES AND PROCEDURES: Test Modes
6-2
68P80400P94-O
6.1.2 Trace Mode Display Screens
Display screens on this unit provide information that is useful for troubleshooting purposes. These
displays appear only when the unit is placed in Debug Mode (see “Entering Debug Mode” on page
6-1).
To navigate through the screens, press the appropriate scroll key to highlight the desired screen, and
then press the View option key. To select a choice within a screen, press the Select option key. To
exit from a choice or screen, press the Back option key.
Table 6-1. Display Screens
Name Description
Unit Info
• Phone Model
• CP Ver
• USR Ver
• CSD Ver
• Software
Tegic
Flash Packs
Displays the unit model number and product sub ID, such as
i850/i760
and A.
Displays the Codeplug Version. The first half of the line displays the codeplug structure and
default version; the second half displays the codeplug bandmap.
Version of carrier specific modification to the product code plug. Programmed at shipment.
Displays the Customer Static Data version. The first number indicates the customer. The
second number indicates the structure revision. The third number indicates the data revision.
Displays the current software version programmed in the unit, as well as the software type
(RSS model) and build date.
Text 9 code version/LDB version.
Version of the preferred language: French, Spanish, Hebrew, Korean, or Portugese and the
associated Font Pack.
Total Usage Displays the number of minutes the unit has used a traffic (dispatch and interconnect) or a
Packet Data channel since manufacture.
Tx Status First line displays the SQE/Carrier data: Outbound signal quality, Frequency band, current
carrier code, and color.
Second line displays Tx power cutback in RSSI.
Third line displays current temperature and the difference between the current temperature
and temperature 2 seconds ago.
Rx Status First line displays the SQE/Carrier data: Inbound signal quality, Frequency band, current
carrier code, and color.
Second line displays Rx power cutback in RSSI.
Third line displays AGC Step Attenuator State, Channel Code.
N6:1 Intrcnct Parameter details for the 6:1 Interconnect Feature enabling transmission of RF-originated
messages through the telephone system.
Line 1 shows
MS
, the Mobile Subscriber's ability to support 6:1 Interconnect and
FNE,
the
Fixed Network Equipment’s ability to support 6:1 Interconnect respectively. Numbers 0 or
1 indicate No or Yes respectively.
Line 2 shows
I
, Interleave of the current channel,
O
, Offset of the current channel, and
S
,
Sub-slot of the current channel. Values for Interleave are 1 – 24, Offset values are 0 – 23,
and Sub-slot can be A, B or N.
Line 3 shows
ECC
, Extended Color Code and
PO,
Primary Control Channel Offset of the
current carrier.
Values for ECC are 0 – 16. Values for PCCH Offset are 0 - 11.
During Trace Mode, radio activity such as interconnect, dispatch call, packet data session,
registration, or location update information will automatically update every 2 seconds.
N6:1 Dispatch Displays status of a new 6:1 dispatch call. Data displayed shows “MS 1 FNE 1”. All other
data combinations are old 6:1 dispatches.
GPS Displays the GPS location, time info, assist, navigation, summary, GPS version.