Motorola i760, Руководство по обслуживанию на месте

Страница: 27 / 112

FEATURES, ICONS, AND INDICATORS: Display Icons
68P80400P94-O
2-5
2.2.3 Call Icons
When you make a call, call icons appear in text area of the phone’s display.
A
Phone In Use —
your phone is active on a phone call.
M
Ringer Off —
your phone is set not to ring.
S SDGC Call In Use
- Unit active on an Selective Dynamic Group call.
o p q r
s
Signal Strength
—Indicates the device is registered and the strength of the
network signal. The antenna portion of the icon is always displayed. Up to 4 bars
are displayed next to the antenna. The more bars depicted, the stronger the signal.
One bar = approx. 19 SQE and >-103 RSSI, 4 bars = approx. 29 SQE and >-88
RSSI. When the unit is in a no-service state, or the signal is less than 19 SQE or
<-103 RSSI, no bars appear next to the antenna.
u
Speaker Off —
Sets Direct Connect and Group Connect sound to come through
the earpiece rather than through the speaker. Your phone does not ring for DC and
GC calls if Alert Type is set to SILENT or Vibrate.
C
Talkgroup In Use
— your phone is active on a Group Connect call.
i j k
l m n
T9 Text Input —
you are using T9 Text Input to enter text.
N O
TTY
— Indicates that unit is connected to a TTY device and TTY mode is
enabled. You can select either VCO (voice-carry-over) or HCO (hearing-
carry-over) mode.
Vibrate On —
your phone is set vibrate.
V
Missed phone call.
Y
Phone call is active.
Z
Phone call is on hold.
U
Phone call ended.
W
Placing a phone call.
X
Receiving a phone call.
S
Selective Dynamic Group call is active.
C
TalkGroup call is active.