66
English
SCAN
When System Scan is enabled:
• The display shows
G
.
• The LED indicator blinks green during
System Scan operation; it stops blinking
when your radio switches to an active
talkgroup or channel.
Note:
If you enter Menu mode while your radio
is scanning, scanning stops. The radio
resumes scanning when you exit Menu
mode.
To start or stop a System Scan:
Press the preprogrammed
Scan
button (see
page 23) to start or stop scanning,
–or–
Do the following:
DELETING A NUISANCE CHANNEL
OR TALKGROUP
Note:
This feature is available only with
PassPort Group Scan or System Scan
operation.
If a talkgroup or channel continually generates
unwanted calls (a “nuisance” channel), use the
preprogrammed
Scan
button to temporarily
delete the talkgroup or channel from the Scan
list.
1
)
to enter Menu mode.
2
+
or
?
until
3
)
to select
You see the current scan status.
4
+
or
?
until
System Scan
System Scan
Sys Scan On?
–or–
5
)
to confirm your selection.
Notes:
• In conventional zones only, if there is
activity on a non-priority channel, the radio
disconnects the user from the current
conversation and automatically switches to
an active priority channel. This is indicated
with a short alert tone.
• Your radio can either revert to a “selected”
channel or the “last active” channel
depending on its programming. For addi-
tional details, contact your local dealer.
Sys Scan Off?
6881088C42_EN.book Page 66 Thursday, May 6, 2010 7:49 PM