47
English
PASS
PORT
T
RUN
KING
ROAM LOCK
Because of the RSSI (Received Signal
Strength Indication) feature, the HT1250•LS+
radio automatically roams to a different site
when the signal falls below the RSSI level
programmed in your radio by your dealer. In
some instances (inside a building or in fringe
areas), you may want to prevent your radio
from roaming. This is possible by enabling the
Roam (Site) Lock function.
Note:
If you are currently on an affiliated site
and wish to lock onto your home site,
you need to first press the
preprogrammed Home Site Revert
button prior to pressing the
preprogrammed Roam Lock button.
To Activate Roam Lock
• The radio sounds a “Low-High” tone upon
successful PassPort System registration.
The
XXX
number indicates the site within
the PassPort system on which you have
registered.
Note:
If the radio is already registered on its
home site and Home Site Revert is
initiated, a bad key chirp is sounded.
4
After successfully
registering on the
home site, the
selected PassPort
talkgroup alias
appears and remains
on the display.
Note:
• The radio must currently be registered on
an affiliated site.
• If the radio cannot register to its Home Site
for any reason, the radio reverts back to its
current affiliated site.
TLKGRP ALIAS
1
Press the preprogrammed
Roam Lock
button
(see page 20).
6881088C42_EN.book Page 47 Thursday, May 6, 2010 7:49 PM