40
English
PASSP
ORT
SI
GN
ALING
Sending a Call Alert using the One-Touch
Button
1
Press and hold the preprogrammed
One-
touch
button.
• The LED indicator lights steady yellow.
• The display shows
F
and the
preprogrammed alias or ID is displayed.
2
The Call Alert is sent automatically.
• The LED indicator lights steady red.
Your radio sounds a continuous tone (if
programmed by your dealer).
3
• While the Call Alert is being established
the
F
blinks and the LED indicator blinks
red momentarily.
• Once the Call Alert is established the
F
displays solid.
• If preprogrammed by your dealer, your
radio sounds a short high-pitched tone
(page established tone) to indicate that the
page was successful.
• If the Call Alert cannot be established,
you see:
No Acknowledge
for 5 seconds. The LED indicator turns off.
• If all channels are busy while attempting a
Call Alert,
you see:
and will hear a delayed busy tone as long
as the
PTT
button is pressed.
If the
PTT
button is kept pressed and the
system frees up a channel, the radio
automatically attempts to re-establish the
call.
•
(
to end the Call Alert and revert to
talkgroup dispatch, or press the
preprogrammed Call Alert button. You can
then manually re-initiate the call. (See Step
1.)
4
(
to end the Call Alert.
System Busy
6881088C42_EN.book Page 40 Thursday, May 6, 2010 7:49 PM