Motorola HMEZ2000 - Homesight Wireless Home Security Monitoring, Руководство пользователя

Страница: 118 / 145

111 Motorola homesight ™ USER GUIDE
Water Sensor
The Water Sensor detects the presence or absence of water and notifies you when a water leak is detected. You can use your Water Sensor to monitor the
presence of water in areas of your business or home, such as a sump pump, basement, beach house, or under a sink, water pipe, or other plumbing fixture. You
can also monitor areas near appliances such as an aquarium filter hose, pool filter hose, hot water heater, washing machine, dishwasher, or lawn sprinkler
system.
The Water Sensor is packaged as a kit featuring two parts: the sensor body and the sensor element, which is affixed at the end of a cable (approximately six feet
in length). The sensor element cable is plugged into a jack located at the bottom of the sensor body. The sensor is immersible and can detect the presence of
water or the absence of water at the sensor element. When water is detected (or lack of water is detected), the sensor sends an event to the Wireless System
Controller, which places a notification into your archive screen. The Motorola
homesight Software system can configure the sensor to send an event upon
detecting a wet condition, or upon detecting a dry condition, or for both wet and dry conditions.
Mounting the Water Sensor
The Water Sensor should typically be mounted no more than 60 to 80 feet from the Wireless System Controller (for indoor operation). The sensor and controller
use radio frequencies to communicate with each other. Those frequencies can go through objects such as walls, ceilings, and floors, so you can put the sensor in a
different room from the controller.