manualshive.com logo in svg

Motorola GM950E, Руководство по обслуживанию

"Motorola GM950E - надежный мобильный радиостанция для профессионального использования. Качайте бесплатное сервисное руководство для этой модели на manualshive.com, чтобы получить подробные инструкции по настройке и обслуживанию устройства. Это необходимый мануал для успешного использования радиостанции."

Поделиться
Скачать
background image

Power AmpliÞer (PA) 5-25W.

4-20

Theory of Operation

A high impedance resonant circuit formed by D5551 in off state and L5554, C5559 prevents an 
inßuence of the receive signal by the PA stages. The high impedance of D5631 in off state doesn«t 
inßuence the receiver signal. 

9.5

Harmonic Filter 

The transmitter signal from the antenna switch is channelled through the harmonic Þlter to the 
antenna connector J5501.The harmonic Þlter is formed by inductors L5552, L5553, and capacitors 
C5557,C5552 through C5555. This network forms a low-pass Þlter to attenuate harmonic energy of 
the transmitter to speciÞcations level. R5550 is used for electro - static protection.

9.6

Power Control 

The power control loop regulates transmitter power with an automatic level control (ALC) loop and 
provides protection features against excessive control voltage and high operating temperatures.

MOS FET device bias, power and control voltage limit are adjusted under microprocessor control 
using a Digital to Analog (D/A) converter (U0731). The microprocessor writes the data into the D/A 
converter via serial interface (SRL) composed of the lines SPI CLCK SRC (clock), SPI DATA SRC 
(data) and DAC CE (chip enable). The D/A adjustable control voltage limit increases transmitter rise 
time and reduces adjacent channel splatter as it is adjusted closer to the actual operating control 
voltage.

The microprocessor controls K9V1 ENABLE (U0101-6) to switch on the Þrst and the second PA 
stage via K9V1. The antenna switch is turned on by the collector current of the second PA stage. PA 
DISABLE, also microprocessor controlled (U0101-54), sets BIAS VLTG (U0731-4) and VLTG LIMIT 
SET (U0731-13) in receive mode to low to switch off the bias of the MOS FET device Q5530 and to 
switch off the power control voltage (PWR CNTL).

Through an Analog to Digital (A/D) input (VLTG LIMIT) the microprocessor can read the PA control 
voltage (PWR CNTL) during the tuning process.

The ALC loop regulates power by adjusting the PA control line PWR CNTL to keep the forward 
power voltage PWR DETECT at a constant level.

Opamp U0701-2 and resistors R0701 to R0703 and R0731 subtract the negative PWR DETECT 
voltage from the PWR SET D/A output U0731 pin 2. The result is connected to opamp inverting 
input U0701-4 pin 9. This voltage which is compared with a 4.6 volt reference VAG present at 
noninverting input U0701-4 pin 10 and controls the output power of the PA via pin 8 and control line 
PWR CNTL. The 4.6 volt reference VAG is set by a resistive divider circuit (R0171, R0172) which is 
connected to ground and 9.3 volts and buffered by opamp U0105-1.

During normal transmitter operation the voltages at the opamp inputs U0701-4 pins 9 and 10 should 
be equal to 4.6 volts and the PA control voltage output at pin 8 should be between 4 and 7 volts. If 
power falls below the desired setting, PWR DETECT increases, causing the output at U0701-2 pin 7 
to decrease and the opamp output U0701-4 pin 8 to increase.

A comparator formed by U0701-4 increases the PA control voltage PA CNTL until PWR DETECT is 
at the desired level. The power set D/A output voltage PWR SET (U0731-2) at U0701-2 pin 5 adjusts 
power in steps by adjusting the required value of PWR DETECT. As PWR SET (U0731-2) 
decreases, transmitter power must increase to make PWR DETECT larger and keep the inverting 
input U0701-4 pin 9 at 4.6 volts.

http://www.myradio168.net

Содержание GM950E





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GM950E

Davis Instruments 151 Assembly Instructions preview
151
Бренд: Davis Instruments Страницы: 3
Sangean ATS-909 Datasheet preview
ATS-909
Бренд: Sangean Страницы: 1
Akai AJ-C2500 Service Manual preview
AJ-C2500
Бренд: Akai Страницы: 48
AMTC Stratus 6 Zone Kit Installation And Operation Manual preview
Stratus 6 Zone Kit
Бренд: AMTC Страницы: 11
AudioSonic CD-1585 Instruction Manual preview
CD-1585
Бренд: AudioSonic Страницы: 45
RACEceiver Legend+ Basic Instructions preview
Legend+
Бренд: RACEceiver Страницы: 2
Albrecht AE 4200 R Service Manual preview
AE 4200 R
Бренд: Albrecht Страницы: 9
Yaesu FT-212RH Operating Instructions Manual preview
FT-212RH
Бренд: Yaesu Страницы: 51
Jensen JCR-360 User Manual preview
JCR-360
Бренд: Jensen Страницы: 18
OPW M00-20-6020 User Manual preview
M00-20-6020
Бренд: OPW Страницы: 22
Cobra Marine MRF45 Owner'S Manual preview
Marine MRF45
Бренд: Cobra Страницы: 38
Crosley CR3004A Instruction Manual preview
CR3004A
Бренд: Crosley Страницы: 5
Ericsson MDX LBI-39014A Maintenance Manual preview
MDX LBI-39014A
Бренд: Ericsson Страницы: 16
Blaupunkt BAC11AFC Instruction Manual preview
BAC11AFC
Бренд: Blaupunkt Страницы: 16
auna 10041150 Instruction Manual preview
10041150
Бренд: auna Страницы: 76
Eaton 455U-D User Manual preview
455U-D
Бренд: Eaton Страницы: 83
jWIN JL-725 User Manual preview
JL-725
Бренд: jWIN Страницы: 3
Motorola CLK446 User Manual preview
CLK446
Бренд: Motorola Страницы: 652

Бренды по названию

Популярные бренды

Загрузить еще бренды