manualshive.com logo in svg

Motorola GM950E, Руководство по обслуживанию

"Motorola GM950E - надежный мобильный радиостанция для профессионального использования. Качайте бесплатное сервисное руководство для этой модели на manualshive.com, чтобы получить подробные инструкции по настройке и обслуживанию устройства. Это необходимый мануал для успешного использования радиостанции."

Поделиться
Скачать
background image

Power AmpliÞer (PA) 5-25W.

Theory of Operation

4-19

By controlling the output power of Q5510 and in turn the input power of the following stages the ALC 
loop is able to regulate the output power of the transmitter.

9.2

PA Stages 

The bipolar transistor Q5520 is driven by Q5510. To reduce the collector - emitter voltage and in turn 
the power dissipation of Q5510 its collector current is drawn from the antenna switch circuit.

In transmit mode the base of Q5520 is slightly positive biased by a divided K9V1 signal to allow a 
collector current to be drawn from the antenna switch circuit and in turn switches the antenna switch 
to transmit while in receive mode the low K9V1 signal cuts off the collector current and in turn 
switches the antenna switch to receive.

The following stage uses an enhancement mode N-Channel MOS FET device (Q5530) and requires 
a positive gate bias and a quiescent current ßow for proper operation. The voltage of the line BIAS 
VLTG is set in transmit mode by a Digital to Analog (D/A) converter (U0731-4) and fed to the gate of 
Q5530 via a resistive divider. The bias voltage is tuned in the factory. If the transistor is replaced, the 
bias voltage must be tuned with the Radio Service Software (RSS). Care must be taken, not to 
damage the device by exceeding the maximum allowed bias voltage. The collector current is drawn 
from the supply voltage A+.

The Þnal stage uses the bipolar device Q5536 and operates off the A+ supply voltage. For class C 
operation the base is DC grounded by two series inductors (L5533, L5534). A matching network 
consisting of C5542-C5544 and two striplines transform the impedance to 50 Ohms and feed the 
directional coupler.

9.3

Directional Coupler 

The directional coupler is a microstrip printed circuit which couples a small amount of the forward 
power off the RF power from Q5536. The coupled signal is rectiÞed to an output power proportional 
negative DC voltage by the diode D5553 and sent to the power control circuit in the controller 
section via the line PWR DETECT for output power control. The power control circuit holds this 
voltage constant, thus ensuring the forward power out of the radio to be held to a constant value.

9.4

Antenna Switch

The antenna switch is switched synchronously with the K9V1 voltage and feeds either the antenna 
signal coming through the harmonic Þlter to the receiver or the transmitter signal coming from the PA 
to the antenna via the harmonic Þlter.

In transmit mode, this K9V1 voltage is high and biases Q5520 to allow a collector current to be 
drawn. The collector current of Q5520 drawn from A+ ßows via L5542,L5541, directional coupler, 
D5551, L5551, D5631, L5631, R5616, R5617 and L5611 and switches the PIN diodes D5551 and 
D5631 to the low impedance state. D5551 leads the RF signal from the directional coupler to the 
harmonic Þlter. The low impedance of D5631 is transformed to a high impedance at the input of the 
harmonic Þlter by the resonant circuit formed by L5551,C5633 and the input capacitance of the 
harmonic Þlter.

In receive mode the low K9V1 turns off the current through the PIN diodes and switches them to the 
high impedance state. The antenna signal, coming through the harmonic Þlter, is channelled to the 
receiver via L5551, C5634 and line PA RX.

http://www.myradio168.net

Содержание GM950E





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GM950E

Radius RADIUS GM300 Manual preview
RADIUS GM300
Бренд: Radius Страницы: 114
Radius RADIUS GM300 Operating Instructions preview
RADIUS GM300
Бренд: Radius Страницы: 2
Dahua DH-PFR5QI-E60 Quick Start Manual preview
DH-PFR5QI-E60
Бренд: Dahua Страницы: 33
BEARCOM BC-MINI Quick Start Manual preview
BC-MINI
Бренд: BEARCOM Страницы: 2
perfect pro usb box Operating Instructions Manual preview
usb box
Бренд: perfect pro Страницы: 177
LENCO KCR-9 Instruction Manual preview
KCR-9
Бренд: LENCO Страницы: 5
Kaide KK-9502L Operating Instructions preview
KK-9502L
Бренд: Kaide Страницы: 4
jotron TA-7650C Maintenance And Repair Manual preview
TA-7650C
Бренд: jotron Страницы: 26
Uniden PMR1189-2CK Manual preview
PMR1189-2CK
Бренд: Uniden Страницы: 2
AUDIOLINE PMR 500 User Manual preview
PMR 500
Бренд: AUDIOLINE Страницы: 10
GME TX3120S Instruction Manual preview
TX3120S
Бренд: GME Страницы: 40
Vitek VT-6607 GY Manual Instruction preview
VT-6607 GY
Бренд: Vitek Страницы: 40
SAL RRT 3B Instruction Manual preview
RRT 3B
Бренд: SAL Страницы: 16
BTECH UV-2501 User Manual preview
UV-2501
Бренд: BTECH Страницы: 47
Kenwood TK-7100 Instruction Manual preview
TK-7100
Бренд: Kenwood Страницы: 24
Kenwood UHF P25 Transceiver TK-5810 Instruction Manual preview
UHF P25 Transceiver TK-5810
Бренд: Kenwood Страницы: 44
Kenwood VFO-230 Service Manual preview
VFO-230
Бренд: Kenwood Страницы: 71
Kenwood TM-732A/E Service Manual preview
TM-732A/E
Бренд: Kenwood Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды