Motorola FX7400 Series, Руководство интегратора

Страница: 96 / 116

B - 2 FX Series RFID Readers Integrator Guide
•
Current firmware file examples:
•
OSUpdFalcon.exe
•
response.txt
•
FlashUpdateUtility.dll
•
FalRData XXX .hex (
Data
partition, XXX is a filename variable)
•
FalRConfig XXX .hex (Reader Config, XXX is a filename variable)
•
FalPlat XXX .hex (
Platform
partition, XXX is a filename variable)
•
FalParTbl XXX .hex (Partition table, XXX is a filename variable)
•
FalOSUnrel XXXXX .hex (OS, XXXXX is a filename variable)
•
FalMon XXXX .hex (Monitor, XXXX is a filename variable)
•
FalData XXX .hex (
Data
partition, XXX is a filename variable)
•
FalConfArea XXX .hex (Reader Config, XXX is a filename variable)
•
FalBkupOS XXXXX .hex (OS, XXXXX is a filename variable)
•
FalApp XXX .hex (Application, XXX is a filename variable)
Refer to the release notes to determine which files were updated; not all of the files are updated in every release.
There is no specific order necessary when installing these files.
Auto Recovery
The Auto Recovery feature allows the reader to recover flash images that are corrupt due to a power outage during
software upgrade. If a firmware upgrade (over LAN) fails (e.g., due to a power outage), on the next reboot the
reader retries the update from the same remote server. If reader cannot complete the update, a recovery web page
appears when accessing the reader management interface via a web browser. To reattempt upgrade, enter the
FTP server path and credentials.
Update Phases
The firmware update takes place in two phases:
Phase 1 - The reader application retrieves the
Response.txt
,
osupdFX.exe
, and
FlashUpdateUtility.dll
files from the
ftp server.
Phase 2 - The reader application shuts down and the
OsUpdate
starts. The files referenced in the
Response.txt
file
are retrieved from the ftp server.
A typical entry in the
Response.txt
is:
; Platform partition version 1.2.7
-t4 -FXc42PlatH127.hex -s2679149
NOTE
The Application Server, Radio API, and MAC firmware code all reside in the Platform partition.
NOTE
The recovery console supports only the FTP mode update, and does not support secure FTP (FTP over
TLS explicit) or CAB file update.