1-2 Introduction
DCT700 Installation Manual
Standard Features
!
MPEG-2 digital video processor
!
ATSC standard Dolby
®
Digital
(AC-3) audio processor
!
ITU standard 64/256 QAM FEC enhanced adaptive equalizer
!
On-board real-time RF return (256 Kbps)
!
Bitmapped graphics display (4/8-bit)
!
88.75 to 858 MHz tuner
!
DES based encryption/DCII access control
!
Digital diagnostics
!
Frequency agile 2.048 Mbps out-of-band data receiver
!
Macrovision copy protection
!
IR support for remote control
Standard Interfaces
!
RF remod output (ch. 3, 4)
!
Baseband video and audio Outputs
Using This Manual
This manual provides instructions to install and configure a DCT700:
Section 1
Introduction
provides a product description, a list of related documentation, the technical
helpline telephone number, and the repair/return procedure.
Section 2
Overview
describes the DCT700 and provides an overview of its use. This section also
identifies the front-panel displays and switches and describes the
rear-panel features.
Section 3
Installation
provides instructions on how to install the DCT700 in a subscriber location
and perform operational tests.
Section 4
Troubleshooting
provides guidelines for troubleshooting the equipment.
Appendix A
Specifications
provide the technical specifications for the DCT700.
Appendix B
Diagnostics
provide instructions on accessing and interpreting the built-in diagnostics.
Abbreviations
and
Acronyms
The
Abbreviations and Acronyms
list contains the full spelling of the short forms used in
this manual.
Related Documentation
Although the
DCT700 User Guide
may be useful, it is not necessary to install or operate the
DCT700 if you have this manual.
