Installation 3-9
DCT700 Installation Manual
3
Press
SELECT
to begin searching for the OOB frequency.
On the OSD the MANUAL FREQ line of text clears, the HUNT MODE displays FIX to
indicate the fixed frequency search, and the CUR FREQ field changes to the frequency
selected to search.
If the frequency is found with the proper EMM Provider ID, the OSD LKC field changes to
display the new frequency.
If after 40 seconds the frequency search is not successful, the set-top performs a warm reset
and returns to the last known carrier frequency.
4
To abort a search without waiting the 40 seconds, press
POWER
to cause a warm reset.
Set-top Cold Initialization
The DCT700 has no front panel buttons. To perform a cold initialization, or
reset
, using the
remote control:
1
Hold down any key while disconnecting and reconnecting AC power to the set-top.
After booting up, the
POWER
LED on the set-top front panel flashes.
2
Within 3 seconds, press
3
.
The
POWER
LED flashes at a decreased rate.
3
Within 3 seconds, press
2
.
The
POWER
LED flashes at an increased rate.
4
Within 3 seconds, press
8
to initiate the cold reset.
During the cold initialization procedure, if the appropriate remote control key is not pressed
within the three-second time period, the procedure terminates and the set-top resumes
normal operation.
