DCT700 Installation Manual
Section 2
Overview
This section describes the DCT700’s displays and connectors. Before you begin to install the
DCT700, familiarize yourself with these displays and connectors.
Figure 2-1
Front panel
MESSAGES
ON
The DCT700 front panel has two LEDs:
ON
Indicates that the unit is on
MESSAGES
Indicates that a message is present
Figure 2-2
Rear panel
TO
TV/VCR
R
L
AUDIO
VIDEO
+12V
DC
RF IN
1
2
3
4
5
Table 2-1
Rear panel features
Key Function
1
Left and right audio RCA jacks used for stereo audio output.
2
RCA jack used to connect the DCT700 to a composite (baseband) video TV or a monitor; in
some configurations this jack connects to a VCR.
3
F-type connector used for DCT700 input from the
TO RF IN
connector.
4
F-type connector used to connect the DCT700 to a standard TV or VCR.
5
DC power connection.
For instructions on connecting the DCT700, see Section 3, “Installation.”
A remote control is required to operate the DCT700. We recommend the Motorola DRC450. See
“Remote Control” in this section for information.
