2-4
Overview
DCT6200\DCT6208 Installation Manual
Rear Panel
The rear panel contains a switched power outlet; connectors for video, audio, and RF cabling;
data output; and modem and data interface connectors.
Some connectors on the rear panel are not enabled and require the support of the application
software.
Figure 2-2
Rear panel
AUDIO OUT
AUDIO IN
TV
Pass Card
VIDEO
R
IN
L
OUT
S-VIDEO
IEEE 1394
OPTICAL
SPDIF
SPDIF
Y
Pb
Pr
ETHERNET
USB
IR
DVI-D OUT
TO
TV/VCR
CABLE
IN
1
2
4
5
6
7
8
9
10
11
12
13 14 15 16
3
Table 2-2
Rear panel connections
Key Item Function
1
TO
TV/VCR
F-type connector used to connect the DCT* to a standard TV or VCR operating on
channel 3 or 4.
2
CABLE
IN
F-type connector used for the coaxial cable input from service provider (input to
integrated RF return).
3
*
ETHERNET
Ethernet 10Base-T port supports PC networking.
4
*
AUDIO IN
R
L
RCA jacks for loop-through audio from audio equipment.
5
SPDIF
The
SPDIF
connector
is a digital output connection that carries Dolby Digital 5.1 audio
or PCM audio.
6
VIDEO
IN
OUT
VIDEO IN
– RCA jack connects the DCT* to a composite (baseband) video input from
a TV, VCR, camcorder, or other video device.
Not enabled at this time.
VIDEO
OUT
– RCA jack that delivers video to a device such as a VCR or TV. Enabled.
7
AC power outlet that can be configured as a switched or unswitched outlet; and a
two-pronged plug for attaching a power cord.
8
IR
Mini phono jack enabling the DCT* to control a VCR using an optional low power IR
Blaster transmitter (not all electronic program guides support this feature).
9
*
USB
The Universal Serial Bus (USB) supports such devices as keyboards, joysticks,
scanners, disk storage, PCs, printers, and digital cameras.
