Motorola CDR500, Руководство по программированию

Страница: 16 / 104

xiv
6864110R66-O March, 2001
Foreword CDR500 & CDR700 Repeater Service Manual
Service Aids
Service Aids
The following table lists service aids recommended for working on the CDR500 Wall Mount Repeater and CDR700
Desktop Repeater.
Test Equipment
The following table lists test equipment required to service the CDR500 Wall Mount Repeater and CDR700 Desktop
Repeater.
Motorola Part No. Description Application
HLN9214 Radio Interface Box Enables communication between the radio and the computer’s
serial communications adapter.
HSN9412 RIB Power supply Used to supply power to the RIB.
HKN9216 Computer Interface cable Connects the computer’s serial communications adapter to the
RIB.
HKN9217 Program Test Cable RIB to Radio Cable
HVN9025 CDM-Series CPS Software on 3-1/2 in. diskettes.
HVN9027 PRO-Series CPS Software on 3-1/2 in. diskettes.
Motorola Model No. Description Characteristics Application
R2200, R2400, or R2001 Service Monitor This monitor will substi-
tute for items with an
asterisk * Frequency/deviation meter and signal
generator for wide-range troubleshooting
and alignment
*R1049 Digital Multimeter Two meters recommended for ac/dc volt-
age and current measurements
*S1100 Audio Oscillator 67 to 200 Hz tones Used with service monitor for injection of
PL tones
*S1053, *SKN6009,
*SKN6001 AC Voltmeter, Power
Cable for meter, Test
leads for meter 1mV to 300V, 10-Megohm
input impedance Audio voltage measurements
R1053 Dual-trace Oscilloscope 20 MHz bandwidth,
5mV/cm - 20V/cm Waveform measurements
*S1350, *ST1215 (VHF)
*ST1223 (UHF) *T1013 Wattmeter, Plug-in
Elements (VHF & UHF),
RF Dummy Load 50 Ohm,
±
5% accuracy,
1-0 Watts, maximum
0-1000 MHz, 300 Watts
Transmitter power output measurements
S1339 RF Millivolt Meter 100uV to 3V RF, 10 kHz to
1.2 GHz RF level measurements
*R1013 SINAD Meter Receiver sensitivity
S1347 or
S1348 (prog) DC Power Supply 0-20 Vdc, 0-5 Amps Bench supply for 12.5 Vdc