Motorola B89 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 69

Motorola B89 Скачать руководство пользователя страница 32

28

May 15, 2001

6881038B20

Disassembly

Product Family B89

5.

Lift the lens completely away from the flip as shown in Figure 18B.

6.

To replace, insert the fingers at the top of the lens into the corresponding recess
on the flip housing and rotate the lens down until the 2 catches snap into place.

7.

Replace the 3 T-4 screws and tighten securely. Do not overtighten.

8.

Replace the antenna, SIM and battery as described in the procedures.

Removing and Replacing the Real Time Clock (RTC) Battery

1.

Remove the battery, SIM, antenna, and lens assembly as described in the
procedures.

2.

Using the flat end of the disassembly tool, gently pry the RTC battery from its
socket on the display board. See Figure 19.

3.

To replace, insert the new RTC battery into its socket on the display board.
The plastic tweezer may be used to replace the RTC battery. Be sure the

G

Do not remove the transparent protective film from the front of the new lens. This
film prevents damage to the lens during service and handling. It is to be removed
only by the end user.

010435o

Figure 19. Removing the RTC battery

G

Use only non-conductive tools, such as the plastic disassembly tool and the plastic
tweezer, when removing and replacing the RTC battery.

DISPLAY BOARD

DISASSEMBLY TOOL

RTC BATTERY

«
...
30
31
32
33
34
...
»

Содержание B89






































































Отзывы:

Нет отзывов