Motorola B89 Скачать руководство пользователя страница 24

Страница: 24 / 69

May 15, 2001

6881038B20

Disassembly

Product Family B89

Removing and Replacing the Light Guide

Remove the battery as described in the procedures.

Using the diagonal cutters, gently grasp the exposed portion of the light guide
and pull straight out of the housing. See Figure 9.

To replace, insert the light guide straight into the opening in the top of the rear
housing and push until fully seated.

Replace the battery as described in the procedures.

Removing and Replacing the Rear Housing

Remove the battery, antenna, and light guide as described in the procedures.

Be careful not to mar the surface of the phone housing or the light guide when using
diagonal cutters in the following step.

010425o

Figure 9. Removing and the light guide

This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.

In addition to 2 screws, the rear housing is fastened with plastic catches. These are
fragile and should be released with care.

LIGHT GUIDE

REAR HOUSING

DIAGONAL

CUTTERS

Содержание B89






































































Результаты поиска

Содержание B89

Отзывы:

Motorola B89, Руководство по обслуживанию, Страница: 24 / 69

Результаты поиска

Содержание B89

Отзывы: